FMM-101
Notifier FMM-101 FlashScan Mini Monitor Module
01
Specifications
- Manufacturer
- Notifier
- Part number
- FMM-101
- Product type
- Monitor Modules
- Protocol
- Addressable, FlashScan
- Platform
- FlashScan
- System type
- Addressable
- Voltage
- 24 V
- Certification
- UL Listed
02
Before you order
Match the part number to the one specified for your system, and check compatibility and required accessories (such as the detector base) in the manufacturer's documentation.
—
Product details
FMM-101 is a Notifier FlashScan miniature monitor module that supervises a two-wire initiating circuit of normally open contact devices on an intelligent SLC. It is small and light enough to sit in a single-gang box directly behind the pull station, waterflow switch or other device it monitors. It can replace older MMX-101 modules in existing systems.
Key features
- Compact 1.3 × 2.75 × 0.65 in body mounts behind the monitored device
- Powered from the two-wire SLC; no additional power needed
- Tinned, stripped leads for quick wiring
- Rotary address switches: 01–159 on FlashScan loops, 01–99 on CLIP loops
- 47K end-of-line resistor provided
Specifications
| Device type | Addressable mini monitor module |
| Input | 1 two-wire IDC, Class B (Style B) |
| Operating voltage | 15–32 VDC |
| Average current | 350 µA (600 µA max., IDC shorted) |
| Max. IDC wiring resistance | 1,500 ohms |
| Max. IDC voltage / current | 11 V / 450 µA |
| EOL resistor | 47K ohms |
| Temperature range | 32–120°F (0–49°C) |
| Humidity | 10–93% non-condensing |
| Dimensions | 1.3 in H × 2.75 in W × 0.65 in D |
Before you order
The FMM-101 supports a two-wire initiating circuit only; for Class A or four-wire fault-tolerant wiring, choose the full-size FMM-1.
—
Documents
Goes with FMM-101
