Fire-Lite SD365 Addressable Photoelectric Smoke Detector

Specifications
- Manufacturer
- Fire-Lite
- Part number
- SD365
- Product type
- Smoke Detectors
- Sensing technology
- Photoelectric
- Platform
- Litespeed
Before you order
Match the part number to the one specified for your system, and check compatibility and required accessories (such as the detector base) in the manufacturer's documentation.
Product details
SD365 is a Fire-Lite addressable plug-in photoelectric smoke detector from the SD365 Series, the replacement for the SD355. Its redesigned optical chamber responds to smoke from a broad range of combustion sources, and it reports to Fire-Lite addressable panels over the two-wire SLC. The white SD365 is a LiteSpeed-protocol device addressed with rotary decimal switches.
Key features
- Photoelectric sensing, factory preset to 1.5%/ft nominal panel alarm threshold
- Removable cover and insect-resistant screen for field cleaning
- Magnet-activated test switch, remote test from the panel and walk test with address display
- Two LEDs blink on poll and latch on in alarm
- Separate base allows swapping between photo, ion and heat sensors
Specifications
| Series | Fire-Lite SD365 addressable smoke detectors |
| Sensing | Photoelectric |
| Protocol | LiteSpeed (white model) |
| Color | White |
| Sensitivity (UL) | 0.5–4.0%/ft obscuration |
| Voltage range | 15–32 VDC |
| Standby current | 200 µA @ 24 VDC |
| Max. current | 4.5 mA @ 24 VDC (LED on) |
| Operating temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 10–93% non-condensing |
| Air velocity | 0–4,000 ft/min |
| Height | 2.0 in (diameter set by base: 6.1 in on B300-6, 4 in on B501) |
| Listings | UL/ULC S1059, FM, CSFM 7272-0075:0502 |
Before you order
Confirm your loop runs LiteSpeed; the ivory SD365-IV supports both CLIP and LiteSpeed. For duct housings (DNR/DNRW) use the remote-test SD365R, and add a sounder, relay or isolator base if the design needs one.


