Fire-Lite H365 Addressable Heat Detector
Specifications
- Manufacturer
- Fire-Lite
- Part number
- H365
- Product type
- Heat Detectors
Before you order
Match the part number to the one specified for your system, and check compatibility and required accessories (such as the detector base) in the manufacturer's documentation.
Product details
H365 is a Fire-Lite addressable plug-in heat detector from the H365 Series with a fixed 135°F (57°C) set point. It uses a thermistor sensor for quick response and reports to a Fire-Lite addressable panel over the two-wire SLC, with its address set on rotary decimal switches. The white H365 is a LiteSpeed-protocol device and replaces the earlier H355.
Key features
- Fixed-temperature 135°F (57°C) thermistor sensing
- Rotary decimal addressing for exact point location
- Two bi-color LEDs with 360° visibility; blink on poll, steady in alarm
- Magnet-activated functional test and panel-initiated remote test
- Built-in tamper-resistant feature; sealed against back pressure
Specifications
| Series | Fire-Lite H365 addressable heat detectors |
| Detection | Fixed temperature, 135°F (57°C) |
| Protocol | LiteSpeed (white model) |
| Color | White |
| Voltage range | 15–32 VDC |
| Standby current | 200 µA @ 24 VDC |
| Max. current | 4.5 mA @ 24 VDC (LED on) |
| Operating temperature | -4°F to 100°F (-20°C to 38°C) |
| Humidity | 10–93% non-condensing |
| Spacing | UL 50 ft center-to-center; FM 25 × 25 ft |
| Height | 2.0 in (diameter set by base) |
| Listings | UL/ULC S2517, FM, CSFM 7272-0075:0501 |
Before you order
The data sheet lists the B300-6 flanged base as included; order a sounder, relay or isolator base separately if the design calls for one. The white H365 runs LiteSpeed only, so for a CLIP-protocol loop choose the ivory H365-IV.
