MIX-M500MAP
Mircom MIX-M500MAP Intelligent Monitor Module
01
Specifications
- Manufacturer
- Mircom
- Part number
- MIX-M500MAP
- Product type
- Monitor Modules
- Sensing technology
- Addressable
- Protocol
- Conventional
- Certification
- Ulc
02
Before you order
Match the part number to the one specified for your system, and check compatibility and required accessories (such as the detector base) in the manufacturer's documentation.
—
Product details
MIX-M500MAP is a Mircom intelligent monitor module for Advanced Protocol addressable systems. It supervises a circuit of normally open contact devices such as pull stations, waterflow switches or supervisory switches, wired as Style B (Class B) or Style D (Class A). Its address is set with rotary decade switches.
Key features
- 2-wire Style B or 4-wire fault-tolerant Style D input circuit
- Panel-controlled status LED
- Addresses 01 to 159 in Advanced Protocol, 01 to 99 in CLIP mode
- SEMS screws; mounts in a 4 in square box
Specifications
| Operating voltage | 15 to 32 VDC |
| Average current | 400 µA |
| Max alarm current | 5.0 mA (LED on) |
| EOL resistor | 47 kΩ |
| IDC wiring resistance | 40 ohms max |
| Operating temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity | 10% to 93% non-condensing |
| Dimensions | 4.5 in H x 4 in W x 1.25 in D |
Before you order
Use a 4 in square box at least 2-1/8 in deep (SMB500 for surface mounting). Power-limited wiring only; do not mix fire, supervisory and security devices on one module. The ULC version is the MIX-M500MAPA.
—
Documents
Goes with MIX-M500MAP
